uniaxial capacitive low G accelerometer
uniaxial capacitive low G accelerometer
for ride & handling measurements at vehicles. The accelerometer can be used to acquire vibrations at a vehicle, seat, steering wheel and other relevant components. The uniaxial sensor is mounted with two M3 screws to the measurement location. Its temperature operating conditions goes from -40°C up to 85°C optional 120°C (+140°C short term).
Technical data as follows:
- Measurement range 2g (*
- Non linearity up to 2g < ± 0,8%
- Frequency range ±3dB at > 200Hz
- Sensitivity typically 500 mV/g
- Supply voltage 7 up to 18 Volts
- Transverse sensitivity better than 1,5 %
- Shock resistant up to 10000g
- Temperature sensitivity typically 0,01%/°C
- ZMO-Drift 0,1 mg/°C
- Housing material aluminium alloy
- Temperature operating conditions -40 up to + 85°C (*
- Weight of sensor approx. 12 grams
- Standard cable type CM7A30-SH70
- Cable outlet on the side
- Certification: Sine calibration
- Polarity of measurement axis positive according to DIN
*) Option:
- High temperature version up to 120°C with 1/4-28 NF integrated socket
- Cable for high temperature version 7m AWG 28 with connector 1/4-28 NF
Note
Measurement ranges 2, 10, 30 and 100g possible.